Home > New Motherboard > New Motherboard + Processor = New Problems.

New Motherboard + Processor = New Problems.

Stock Intel coolers connect to the motherboard using four prongs, while stock AMD coolers are installed at an angle in metal tabs. There could be a short caused by a misplaced standoff, a loose screw, metal chips from shoddy materials. Don't improvise your thermal material, go to a computer or electronics store and buy some if it didn't come with the parts you purchased online. Remove any cards in your old motherboard's expansion slots. have a peek at this web-site

Back to top #14 ediskeum ediskeum Topic Starter Members 33 posts OFFLINE Local time:11:48 AM Posted 03 January 2016 - 12:37 PM Ahhh, I see. However, when I boot up the system, it tells me about an Over voltage error, and suggests I go to the bios. I couldn't get W8 to work reliably (but it did work somewhat). Apply an approved thermal grease or thermal tape before reinstalling the heatsink.

solved New build wont test boot. I have Antec 900 case and I would prefer a mobo from NewEgg,THANKS! You may have to angle the processor a little bit to get it out from under the socket cover, but make sure you are clear of the pins before doing so. I'm gonna wait a few hours before I ship the board out to see if anyone else has any ideas.

Me and a friend checked connections, rebuilt it, reinstalled two different versions of Windows multiple times. It just booted and then Vista re-installed various devices by itself.However, there is a problem with my new mobo. If you already have it running, I would try other software to see what reading they provide for your voltages. Privacy Policy Terms of Use PCMag Digital Group Accessibility Statement privacy policy | © Copyright 2017 Ziff Davis, LLC.

Check the motherboard manufacturer website to make sure that the exact CPU and memory modules (brand and specifications) are listed as compatible with the motherboard. I do know that NTFS is a secure file format and it's tough to crack, and the security features may prevent the files from being accessable on a different install. Yeah, I believe the stock Input voltage should be about 1.8V for your CPU. http://www.tomshardware.com/answers/id-2647142/motherboard-cpu-problems.html If the power isn't coming on, proceed to Power Supply Failure flowchart.

Ask us. wikiHow Contributor Check the motherboard manufacturer's website to see if an update is available. Inspect the edges of the socket with a bright light and a small mirror if possible. I guess since I change my motherboard there is new factory reset now.

Why the other hdd doesn't come up? :( MarfooMember Since: March 22, 2004Posts: 5994MarfooFollowForum Posts: 5994Followed by: 0Reviews: 0 Stacks: 0Forum Karma: 0#43 Posted by Marfoo (5994 posts) - 7 years, https://www.cnet.com/forums/discussions/problem-after-installing-new-motherboard-and-processor-211861/ So I'm using a different model entirely and got windows installed no problem. phireblastMay 21, 2015, 3:22 AM 1LiquidPC said: Is the error preventing your OS from booting? Your motherboard manual will explain the proper layout, but a little trial and error may be required. 5.

Not enough power Yes, listing “check the power” as the first step in any guide is a bit cliché, but it’s an absolute must here, because motherboards have not just one Check This Out Back to top #12 ediskeum ediskeum Topic Starter Members 33 posts OFFLINE Local time:11:48 AM Posted 02 January 2016 - 10:56 PM So both tests passed with flying colors. Discussion topics include choosing a processor, installing hard drives, adding RAM, upgrading video cards, sound cards, DVD drives, Blu-ray drives, PSU, and much more.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General discussion problem after Now just help me to find the right motherboard.

Before closing up your computer, make sure everything that you detached in order to reach the CPU has been properly reattached. 10 Close up your case. I've tried everything... Flag Permalink This was helpful (0) Collapse - If you have an USB legacy bios setting by ask4anu / October 13, 2006 6:40 AM PDT In reply to: got it solved! Source If help is needed, please PM a staff member for assistance.

Return to Diagnostic Chart Does the system boot from a CD or DVD, or from a bootable memory stick? I fixed it (it seems). I figured you could basically ignore it and your system would load the OS regardless.

It should arrive on Tuesday.

If the heatsink obstructs your view completely, you can either remove the heatsink now to check and reseat the CPU, or you can continue troubleshooting, always remembering that you haven't done Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion Still feel free to PM me Did you read this? I mean I completely wiped my hard drives so it wasn't drivers or anything.

OPuniverseMember Since: February 14, 2009Posts: 1943OPuniverseFollowForum Posts: 1943Followed by: 0Reviews: 0 Stacks: 0Forum Karma: 0#4 Posted by OPuniverse (1943 posts) - 7 years, 9 months agoHow could I do that?deiviuxs download Register now! New mobo/processor/ram installed, problems ever since. have a peek here If you've gone the Windows-reinstall route, put your Windows CD into the optical drive, direct the BIOS to boot from it, and follow the prompts to reinstall the OS.

If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Click the "CPU" tab and note what is displayed in the "Package" field. 3 Visually inspect the motherboard if you can't find documentation. http://omgdebugging.com/5-tips-for-getting-the-best-bang-for-the-buck-at-fast-food-joints/ Back to top #3 ediskeum ediskeum Topic Starter Members 33 posts OFFLINE Local time:11:48 AM Posted 24 November 2015 - 06:00 PM Hey there! You can usually restore these from a major CMOS Setup menu item like "Restore Default Settings" or "BIOS Default Settings." The default settings usually put everything on autodetect and use the

I might have to do it myself and Im a bit worried in case I do something wrong. New Motherboard...CPU Cooling Problems solved Weird CPU and/or Motherboard problem when trying to POST new pc build Can't find your answer ? The hard part is not the hardware installation--modern motherboards are easier to set up and install than in years past--it's bringing up an existing Windows installation and all your applications.In this Problem with New Motherboard.How to reduce the CPU fan speed and Heat?

I've encountered standoff shorts that produce an endless string of beeps like RAM failure, without damaging the motherboard. Borrowing another PSU is currently out of the question unfortunately. 1LiquidPCMay 21, 2015, 2:06 AM Is the error preventing your OS from booting? Return to Diagnostic Chart Are you able to access the BIOS (CMOS Setup) by pressing the hot key(s)? deiviuxsMember Since: December 26, 2005Posts: 419deiviuxsFollowForum Posts: 419Followed by: 0Reviews: 14 Stacks: 0Forum Karma: 0#40 Posted by deiviuxs (419 posts) - 7 years, 9 months agoAlright, I have replaced the motherboard

Part 2 Removing Your Old Processor 1 Open up your computer case. Now everything works fine and you can definitely use the same cable for cd and hdd drive. Don’t be intimidated; the problems above, though far from uncommon, can be handled with a little patience.  Image credit: Wikmedia/Petteri Aimonen, Flickr/Judy-Robinson Cox Jump to content Sign In Create Account Back to top #11 ediskeum ediskeum Topic Starter Members 33 posts OFFLINE Local time:11:48 AM Posted 02 January 2016 - 06:38 PM Ok, thank you for taking interest and helping

MarfooMember Since: March 22, 2004Posts: 5994MarfooFollowForum Posts: 5994Followed by: 0Reviews: 0 Stacks: 0Forum Karma: 0#45 Posted by Marfoo (5994 posts) - 7 years, 9 months agoDid you set the "Master" and deiviuxsMember Since: December 26, 2005Posts: 419deiviuxsFollowForum Posts: 419Followed by: 0Reviews: 14 Stacks: 0Forum Karma: 0#3 Posted by deiviuxs (419 posts) - 7 years, 9 months agoHow could I do that? If different speeds are mixed, some mother-boards will fail to boot, the others will default all memory access to the lowest speed DIMM detected. I was wondering, maybe I could use the same ATA cable to connect CD-ROM and HDD together to the mobo?