Home > Hard Drive > Secondary Hard Drive Not Detected Windows 10

Secondary Hard Drive Not Detected Windows 10


My 1st IDE HDD working normal way when 2nd SATA HDD detached. They should have some instructions posted. Was the drive detected again when you put the drive as slave? FIxed in a flash Report anal- May 3, 2011 at 07:43 AM its very useful for me , pls keep this type suggetion. navigate here

However, I can take my hard drive out and put it in a caddy, attach it to my other computer via USA and all the files are there and readable. I did it anyway. Do you think the new drive will operate OK without MaxBlast5 installed on my PC? Report crobar- Feb 9, 2010 at 06:50 PM You're absolutely right, I have the same problem as the original guy, I have an old hard drive. http://ccm.net/forum/affich-26671-second-hard-drive-not-recognized

Secondary Hard Drive Not Detected Windows 10

accidentally snatched from usb port with my foot and it only shows 500gb now. John_VanKirkJul 5, 2011, 8:03 PM Hello again,Do you mean that without your secondary HDD being connected to the MB, all works OK. Several functions may not work. There are two more sets of pins that I might try to play with –toppy42 Jul 19 '13 at 19:48 1 "Slave Off" means no jumper should be set.

It already had a copy of xp service pack 2 on it, I was putting it in for backup of the original drive. If changing the jumper to CS does not work the only thing I could recommend is what I posted, put the other hard drive on a separate IDE channel as master. Why were the Red Guards so trusted? Internal Hard Disk Not Detected In Bios Jacqui Best October 16, 2013 3:54 pm Reply # Anonymous, Did you slave it via IDE, SATA, or USB?

Unfortunately, hard drives are a commodity and need to be treated as such. ha14 June 13, 2013 at 9:55 pm 1) Right-click on “My Computer” then Click on “Manage” or open Computer management from cntrol panel then administrative tools http://windows.microsoft.com/en-us/windows7/what-are-administrative-tools 2) Double-click “Disk Management” For NTFS the default cluster size is 4K which is pretty much the best tradeoff between speed and storage space. navigate to these guys thanks anyway December 24, 2012 Jason Hello, I run Windows 7 64bit and I just installed and double checked the connections for a 1TB seagate HDD.

Same goes for SATA controllers.I think some SATA drives have legacy IDE plugs on them, but I'd only use the SATA plug with the small serial cable. Not Recognizing External Hard Drive July 4, 2012 ron i have external 1tb wd5000aav external usb. Any help or suggestions please? I just rebuilt my PC using an ASUS A7V880 Mobo, AMD AthlonXP 2800+ with 1Gb RAM.

Second Hard Drive Not Showing Up In Disk Management

Subscribe to Our Newsletter Email: Advertisement © 2017 MakeUseOf. why not try these out There are other techs that have SSD hard drive experience that will be able to help you troubleshoot this issue. Secondary Hard Drive Not Detected Windows 10 I always try to ascertain if that is actually what is occurring or if it is more that the drive no longer has a drive letter attached to it. Second Hard Drive Not Detected In Bios Can anyone help please??

When I tried to print a document from my laptop to the attached printer it gave me an error message saying there was print spooling problem. check over here Once you get to disk management it is pretty self explanatory. Therefore most people can run 6 devices note that each sata connector MUST NOT be shared you may only connect 0 - 2 sata devices and 0 - 4 IDE devices.If Webdesign by ComputerGeekz LLC Contact Us We would love to hear from you! Second Hard Disk Not Detected Windows 7

It sees any other IDE drive attached, but not the HDD. If you have a hard drive running in your computer it is only a matter of time before it fails. There is no option on the mobo to boot from SATA. his comment is here As a result, I'm inclined to believe this is a problem with the motherboard or BIOS.

I try a restore and got nowhere and system restore from dvd and message no hdd space, same with a win 7 disk I borrowed. How To Detect New Hard Drive Windows 10 And here one thing to note is that it is preferred to have the CD-ROM and other non-hard drive products on the secondary ATA channel. by rbird / July 22, 2005 11:48 PM PDT In reply to: Mixing SATA and IDE drives in a system?

The two drives, of course, are on separate channels, being that this M2A-VM is a Sata 3M MOBO.

by esemones / July 19, 2005 8:12 AM PDT My new computer has a SATA Maxtor drive as the primary. Either way, it does sound like your drive it shot. Click next and soon the new drive is available. How To Get Windows To Recognize Ssd It should still show up under the BIOS, though.

A wizard will pop up and walk you through this process. The next step in this case is to flash the BIOS. Thanks April 1, 2012 Dave The disk doesn't appear under My Computer as a D or E drive? http://directcomputerrepair.com/hard-drive/no-hard-drive-detected-dell.html If you are running XP navigate to Documents and Settings and find same.

A little warning though don't over run the drive if it is a physical problem with the hard drive you may make the problem worse. Its working as you said i feel running vibration when I touch the top. I have checked system's cables, power supply and also changed them but in vain. Brian Cooley found it for you at CES 2017 in Las Vegas and the North American International Auto Show in Detroit.

Please let me know if you have any other problems osait January 23, 2016 6:38 am Reply # Hey i ran the DTI surface scanner with my crashed laptop hard disk. The BIOS picked it up, and I was able to see everything on Windows 7. Once you're in the BIOS you'll want to go into standard CMOS where you should see something like this: Run the system setup program. Read more.

Ideas? Not really sure what the problem is, but based on the hard drive size, it sounds like an older drive that may have died. Troubleshooting No hard drives show up: Do you have two drives on the cable? I tested my HDD.

neither of this partitions let me install windows as they say it cant read the SATA drive.> the third thing that i found really weird was that when i reinstalled windows I moved the exact same setup over to the new computer and it still didn't work. Related Resources solved Hard Disks - 2nd SATA drive detected in BIOS but NOT in Windows Disk 2nd Sata Hard Drive not Detected in BIOS solved SATA Hard Drive Not Detected I have 2 drives.

Windows 7. Thanks in advance… David Mohyla January 15, 2013 2:08 pm Reply # Hi Josh, try Mac Drive. Report Ronnie- Dec 13, 2009 at 09:08 AM Thanks buddy It's works......... Jacqui Best October 16, 2013 3:42 pm Reply # Bill Morris, Here is the deal network attached storage runs off its own hybrid OS (usually Linux) and each manufacturer has their

will do everything possible to recover the data, including replacing components or making it functional to extract the data. Maybe try a BIOS update for the mobo…there's probably a new BIOS since the computer is so old. Second Sata Hard Drive Not Recognized by Windows XP 2nd SATA Hard Drive not shown on my computer [Solved] (Solved) External USB hard drive not recognized in Windows Helpful +177 Report Did you ever find out what your possible problems could be?