Home > Hard Drive > Installed New Hard Drive Windows Won't Boot

Installed New Hard Drive Windows Won't Boot

Contents

Maxblast is just a partitioning and formatting utility supplied from the manufacturer. I do have a suggestion though, could you add a few pics here and there so that we can see what you are talking about. The W2K also detected the new drive when I try check in the ‘device manager'.However, there isn't one WD SATA HD in the explorer. Reply David on September 10, 2007 at 12:58 pm I must be missing a step.I cloned my 90GB IDE onto a 250GB IDE using a bootable HD Cloning CD.Everything appears to have a peek at this web-site

Don't know if it's important, but i'm running XP. My System Specs System Manufacturer/Model Number Custom built OS Windows 7 Ultimate 64 bit CPU AMD Phenom II X4 965 Black Edition Motherboard Gigabyte GA-MA790X-DS4 Memory GSkill 4 X 2 GB just look at the power connectors in your computer, then double check what connector your drive requires and go buy it. thanks.

Installed New Hard Drive Windows Won't Boot

I would think the Bios would show the new hard drive. Short URL to this thread: https://techguy.org/1163627 Log in with Facebook Log in with Twitter Log in with Google Your name or email address: Do you already have an account? My System Specs System Manufacturer/Model Number Custom built OS Windows 7 Ultimate 64 bit CPU AMD Phenom II X4 965 Black Edition Motherboard Gigabyte GA-MA790X-DS4 Memory GSkill 4 X 2 GB IDE hard drives have settings for master, slave and cable select.

Make sense? Thanks in advance. AHCI is enabled My System Specs System Manufacturer/Model Number Home Build OS Windows 7 Home Premium 64 bit CPU Intel Core i3 2100 Motherboard ASUS P8Z68-V LX Memory Kingston DDR3 1600 Computer Freezes When Accessing Hard Drive Reply John Oliver on May 23, 2008 at 4:02 pm Excellent article.

Cheers, Mick July 18, 2012 Dave Mike, since his might take a lot of back and forth, please join our forums at http://www.pctechytes.net and ask this question there. September 14, 2011 Dave If this is an old hard drive it might have failed electrically-there's nothing you can do about that. How do I get windows to access the drive???? http://www.tomshardware.com/forum/280318-32-windows-boot-hard-drives-installed Why do model aircraft fly and maneuver so differently from real aircraft?

How do I decline a simple task from a customer? Replaced Hard Drive Wont Boot I have a blank IDE Drive that I installed and it wasn't recognized until I went into disk managememnt, put it online, and formatted. Reply Robert on October 25, 2008 at 3:50 pm Great Article. The drive may need to be partitioned and formatted in order for you to see it.

Secondary Hard Drive Freezing Computer

All of the above-mentioned utilities are available on the Ultimate Boot CD, so you can download and burn that and then choose the utility that is easiest for you to understand. As it is full of data and pictures I do not want to reformat it. Installed New Hard Drive Windows Won't Boot When I try to boot up the new HD using my Windows boot/installation disk, I get a message that Setup could not find any HD installed on my PC. Hard Drive Freezes Computer When Connected However, I am still stumped.

Cheers, I wanted to praise your willingness to help. http://directcomputerrepair.com/hard-drive/computer-won-39-t-boot-with-second-hard-drive.html I think my HDD knows me. I have checked system's cables, power supply and also changed them but in vain. TX Reply thenson on August 14, 2007 at 9:51 pm I was told that I fried my mother board from a local docal {dumb corner guy) 2nd hand computor store. Computer Won't Power On With Hard Drive Plugged In

Anyway...Thanks again M8 Report SAME PROB- Dec 25, 2008 at 02:40 AM THANKS IT DID WORK!!! I have a Corsair Force 3 120GB SSD. Installed a second drive as a slave Bios saw it but my computer did not I tried what you said and with a few mods it worked All I can say http://directcomputerrepair.com/hard-drive/hard-drive-not-installed-dell.html January 19, 2010 Dave It's not unusual for laptop drives to die.

The jumper pins on the back of the drive should be set to Master for the Primary and Slave for the Secondary. Windows 7 Won't Boot With Second Hard Drive How can my friend who lost her French residence permit card before exiting the Schengen Area return to France? The motherboard is MSI-7176 (945P NEO) with P4 3.2, 3GB DDR2 800 (1gb +0.5gb x 2). 2 IDE slots and 4 SATA ports. 2 external storage HDD as USB.

It should work...

I bought an Uber Chakra case and a WD Caviar Blue Hard Drive. I did not install the belwo mentioned system… I have three HD's installed currently two 20GB and a 10 GB. Thanking you, Yours truly, B.Ranganathan Reply Michael on March 6, 2009 at 5:08 pm Thanks. Installed A New Hard Drive Now Computer Won't Turn On Reply LUIS RESTO on June 24, 2009 at 11:06 pm DAVID YOU ARE THE BEST BROI want say Thanks so much for this postthis post help me alotthanks again DAVID RISLEY

Next day, same thing happened. Thanks. I bought an LG BH14 Blu Ray DVD drive to replace my old LG drive. http://directcomputerrepair.com/hard-drive/dell-hard-drive-not-installed.html Good luck.

When the “Clean” process was complete I had a drive that worked correctly again. Finding the manager and getting it to format so I could see it on my computer was the missing step. All three drives are recognized by the BIOS, however the system will only boot if I disconnect the healthy Samsung SATA data drive. If you have a hard drive running in your computer it is only a matter of time before it fails.

I tried to keep the drive in external hard disk case and kept in usb port. Please advice me… Thanks Mahesh July 12, 2012 Dave I would go to the seagate website and see if they have any free diagnostic software (like SeaTools) to test the drive. There are several scenarios for this type of problem and we will try to address some of these along with their resolution. To The Forums!

the drive spins, but apparently isnt recognized….is it far gone or is there ANY way i can get 2 years worth of vacation and emotionally valuble photos and files off this Turn on your system and your computer will boot to your xp os then you do all your formatting on your sata drive. You can try right-clicking My Computer, select Manage and look for the Disk Management section. I have to start at "start windows normally" and then tries to boot further but then blue screens and says disc drive is not configured properly.

Well, thing is, I have 900GB of data on the drive that I cannot lose. For simplicity, stick with the Master and Slave setup. It's getting a bit... I notified the WD desktop help by e-mail a day ago--and I'm still waiting for a response--and searched their troubleshooting archives and forum for a similar case but came up with

Works great :-) Helpful +11 Report rocky Jan 17, 2009 at 09:03 PM I had the same problem and the following worked for my Hp Pavilion with WinXP ------ go to Isolated to the WD hard drive as problem. When my daughter's computer died, I put HER HD in an external enclosure and used it as an external HD.