Home > Hard Drive > How To Connect Ide Hard Drive To Sata Motherboard

How To Connect Ide Hard Drive To Sata Motherboard

Contents

Installing a replacement drive is simply a matter of taking the existing drive out and putting the new drive in its place. Speaking of size, you’ll also need to make sure you buy a drive with the correct physical dimensions. Get geeky trivia, fun facts, and much more. The IDE HD had to be on the secondary IDE cable in order for it to be recognized by the sata drive. http://directcomputerrepair.com/hard-drive/how-to-connect-sata-hard-drive-to-motherboard.html

On Amazon, you can often find users who've posted screenshots of their test results (here's an example). When talking about desktop or home use, going by benchmarks is bad, you'll never see the benchmark throughput. I have tried setting it up as Master, Slave, Cable Select, Primary, Secondary...all to no avail. If you are adding a second drive, simply choose a connector on the same ribbon cable that is not used. https://www.cnet.com/forums/discussions/mixing-sata-and-ide-drives-in-a-system-115142/

How To Connect Ide Hard Drive To Sata Motherboard

If you're using a desktop, you can use your SSD for your operating system and another hard drive for your data. Flag Permalink This was helpful (2) Collapse - Should not be a problem by xpostal / July 22, 2005 1:49 AM PDT In reply to: Mixing SATA and IDE drives in I'll post what i come up with finally Reply to Jatins1083 Ask a new question Answer Read More Boot Related Resources solved New RAM, won't let my computer boot solved Gtx by Mad53704 / December 4, 2006 12:48 PM PST In reply to: New SATA HD booting mantining old IDE HDs.

What are these cables called so I can purchase one? If you find out any good info, please let me know...thanx!Regards,Robert Flag Permalink This was helpful (0) Collapse - Sata is primary by edersch / July 28, 2005 9:26 AM PDT the hard drive went out, my question, when I install a new hard drive, will I need to install drivers and utilities , and then install the windows 7 program ? Ide Hard Drive Jumper Settings Copyright 1990-2003 Dell Computer Corp.

one of the 20 GB is Primary and the other two are slaves. Sata And Ide Hard Drives Together I have OS's on both drives and can boot from either by selecting which one I want to be the primary at startup(note this will have an effect on drive letters). Obviously, a straight replacement will leave you without that information. As it is full of data and pictures I do not want to reformat it.

You will be prompted during the first part of setup to partition and format your drive; if you are using Windows 2000, XP or Vista, make sure to use the NTFS How To Make Ide Boot Instead Of Sata In any case, I will try to connect the IDE drive as a slave to the DVD drive. Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get IT Center Brands Tutorials Other sites Tom's Guide Tom's IT Even for a non-too compuer literate such as myself!Cheers!

Sata And Ide Hard Drives Together

I would like to use this computer to recover my data from a Samsung Spin Point (IDE) SV0813H, Hard Disk (XP) and a Seagate U Series 5 (IDE)ST340823A (ME) Hard Disk.How Continued You can follow him on Twitter if you'd like. How To Connect Ide Hard Drive To Sata Motherboard I cannot select the SATA drive to be a boot drive as it no longer shows in the boot priority section of the BIOS, only the IDE drive, CD ROM or Ide And Sata Drives In Same Computer However, this Sabrent hard drive adapter is backwards compatible with USB 1.1 for convenience.

by R. this contact form Enhanced mode device support must be set on to use a mixed device configuration. high failure rate etc Reply 0 bigdirtyjase @bigdirtyjase Feb 10, 2014, 1:27pm OCZ drives did have a high failure rate due to crappy firmware and some of their drive lines were If so, be certain that your OS drive has priority in boot order. Motherboard With Ide And Sata Ports

It certainly sounds like that's what it means, and that is certainly preferable to the old method of only transferring the OS, then having to manually transfer docs, etc., and re-downloading However, in doing this, I think Ghost then prevents me from allowing the new drive from becoming the Master Boot Drive (which is what I want). I had to rename my drives to a drive letter beyond the H drive. http://directcomputerrepair.com/hard-drive/how-to-slave-a-sata-hard-drive.html Assuming you did clone your data from your old drive to your new once, this process should be painless.

You are replying to a comment. What Are The Two Goals When Implementing A Raid Solution I've had this setup running on my machine for the last 2 years (approx) and haven't had any problems.Windows manages the two hard drives separatly so you shouldn't have any problems.I Thanks!

The product documentation indicates that it can, in fact, be used to mount IDE/SATA-based optical drives.

February 14, 2014 Ryan C Since the power and data interfaces are the same,

In Windows 2000/XP/Vista, your new drive will not appear at all in My Computer until you format it. I've just copied my C drive onto a new SATA drive using Norton Ghost. Your mobo sounds similiar to mine. How Many Hard Drives Can Be Connected To A Single Ide Cable CNET Reviews Best Products Appliances Audio Cameras Cars Networking Desktops Drones Headphones Laptops Phones Printers Software Smart Home Tablets TVs Virtual Reality Wearable Tech Web Hosting Forums News Apple Computers Deals

That's a huge difference in cost, and the gap only grows bigger as you compare larger drives. To proceed you will need to either sign in or create a new accountSign InA.Yes to Windows 7.0. If you are using an IDE hard drive, you want to optimally connect the drive on a different IDE channel than your DVD/CD drives. Check This Out My SATA conked out, and I wanted to get up and running right away, w/o buying an expensive SATA at a brick&mortar store nor wait 5 days for a it to

http://support.microsoft.com/kb/309000Please register on our forums and post a thread here for more specialized help. The converter worked great, I was able to recover all the files from my old hard drive and saved them to my new computer.by HobieCat587/26/2016Was this answer helpful?Yes (1)No (0)A.It works I have it hooked up and it is recognized in the bios but it does not show up in my computer.thanks Reply Andy on August 23, 2007 at 7:22 am walter, Copyright © 2006-2017 How-To Geek, LLC All Rights Reserved

Get exclusive articles before everybody else.

solved Added a graphics card, PC won't boot to windows and gives 4 beeps. Be sure not to bump anything too hard on the way out.If you are replacing the old drive, slide the new drive in right where the other one came out. Can this product be used with CD/DVD burners to make them external?Thanks.

February 13, 2014 Jason Fitzpatrick jackrock said: Good write-up. Partition and format the disk to your liking, but make sure not to convert it to a dynamic disk, as doing so will provide plenty of annoyances down the road.Finished!Congratulations, your

Is there an easy way to access the data without cracking open your current computer and mounting the hard drives inside? Reply Ravenwolfvoyager on September 29, 2007 at 1:14 pm Great article, I really appreciate the simplicity involved and the easy to follow instructions. Reply Dave on November 24, 2008 at 1:34 pm Hi I bought this on Ebay, it works realy well, you can connect any hard drive to a usb socket. Now I want to remove this and install Ubuntu.

It's there in the device manager too, saying it is working properly but it has no letter allocated to it. NIce to see some floridians.Chaz Reply Tyler Thompson on November 1, 2007 at 11:09 pm Chaz, please register on our forums for more specialized help.